Takardar Fiberglass Mai Laminated ta Epoxy Phenolic 3240
Umarnin Samfuri
Wannan samfurin an yi shi ne da aka yi da zane mai laushi wanda ba shi da alkali, an saka shi a cikin ruwan zafi na epoxy phenolic resin. Matsayin thermostablity shine matakin B. Yana da kyawawan halaye na injiniya da na dielectric, Yana aiki a cikin injina, lantarki, lantarki, lantarki da sauran fannoni. Hakanan ana amfani da shi wajen sarrafa sassan rufi, kuma ana sarrafa shi zuwa kowane nau'in sassan rufi da kayan aiki masu rufi, waɗanda za a iya amfani da su a yanayin danshi da man transformer.
Bin ƙa'idodi
Daidai da GB/T 1303.4-2009 resin thermoset na lantarki laminates na masana'antu - Kashi na 4: laminates masu tauri na epoxy resin, IEC 60893-3-2-2011 kayan rufewa - resin thermoset na lantarki laminates masu tauri na masana'antu - Kashi na 3-2 na takamaiman kayan EPGC201.
Aikace-aikace
1) Ana amfani da shi wajen buƙatar aikin injiniya na babban injin, kayan aikin lantarki da sassan tsarin rufewa
2) ICT, ITE suna sarrafa sarrafa sassan rufi, kayan gwaji, maɓallan maɓallan roba na silicon
3) Farantin kayan aiki, plywood na mold, farantin niƙa na kan tebur, injunan marufi, tsefe, da sauransu
Hotunan samfur
Babban Kwanan Wata na Fasaha (Danna nan don saukar da rahoton gwaji na ɓangare na uku)
| Kadara | Naúrar | Matsakaicin ƙima | Matsakaicin ƙima |
| Ƙarfin lankwasawa yana daidai da laminations (MD) | MPa | ≥340 | 396 |
| Ƙarfin tasirin Charpy daidai da laminations (Notched, MD) | kJ/m2 | ≥33 | 40.6 |
| Ƙarfin tauri (MD) | MPa | _ | 263 |
| Ƙarfin wutar lantarki yana daidaita da laminations (a 90℃ ± 2℃ a cikin man transfoma mai lamba 25#, gwajin mataki-mataki na 20s, Φ25mm/Φ75mm silinda electrode) | kV/mm | ≥14.2 | 21.5 |
| Ƙarfin wutar lantarki mai lalacewa daidai da laminations (a 90℃±2℃ a cikin man transfoma mai lamba 25#, gwajin mataki-mataki na 20s, Φ130mm/Φ130mm farantin lantarki) | kV | ≥35 | 90.0 |
| Izini na Dangantaka (1MHz) | _ | ≤5.5 | 4.62 |
| Juriyar Rufi (Electrodes masu taper fil, kuma tazarar lantarki shine 25.0mm) | Ω | ≥5.0 x1012 | 2.9x1013 |
| Juriyar Rufi (Bayan awanni 24 a nutse cikin ruwa, ta amfani da na'urorin lantarki masu taper fil, kuma tazarar lantarki shine 25.0mm) | Ω | ≥5.0 x1010 | 2.3x1013 |
| Yawan yawa | g/cm3 | 1.9-2.1 | 1.98 |
Tambayoyin da ake yawan yi akai-akai
Q1: Shin kai mai ciniki ne ko kamfani?
Mu ne manyan masana'antun hadakar kayan rufewa na lantarki, Mun kasance muna aiki a cikin hadakar thermoset mai tsauri tun daga 2003. Ikonmu shine 6000TON/shekara.
T2: Samfura
Samfura kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya za ku tabbatar da ingancin samar da kayayyaki?
Don kamanni, girma da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da tsari mai tsayayye, kuma za mu riƙa duba samfur akai-akai, za mu iya bayar da rahoton duba samfura kafin a kawo mana.
Q4: Lokacin isarwa
Ya dogara da adadin oda. Gabaɗaya, lokacin isarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da takardar sana'a ta ƙwararru don yin marufi a kan pallet ɗin plywood. Idan kuna da buƙatun marufi na musamman, za mu yi marufi kamar yadda kuke buƙata.
Q6: Biyan Kuɗi
TT, 30% T/T a gaba, ma'auni kafin jigilar kaya. Muna kuma karɓar L/C.