Takardar Fiberglass Mai Laminated ta Epoxy 3250N
Umarnin Samfuri
An yi wannan samfurin ne da zane mai zare na gilashi mara alkali na lantarki a matsayin kayan tallafi, tare da babban resin Benzoxazine na TG a matsayin abin ɗaurewa ta hanyar matsewa mai zafi wanda aka laminated a ƙarƙashin zafin digiri 210. Yana da ƙarfin injina mai ƙarfi a ƙarƙashin yanayin zafi na yau da kullun, har yanzu yana da ƙarfin injina mai ƙarfi, kyawawan halayen lantarki a ƙarƙashin yanayin busasshe da danshi, ana iya amfani da shi a cikin yanayi mai danshi da man transformer. Yana cikin kayan hana zafi na aji F.
Aikace-aikace
Ana amfani da shi ga kowane irin injin, lantarki, lantarki da sauran fannoni, ana amfani da shi sosai a cikin injin, kayan lantarki kamar sassan tsarin rufi, makullin wutar lantarki mai ƙarfi, makullin wutar lantarki mai ƙarfi (kamar kayan rufin stator na mota a ƙarshen biyu, yanki na farantin rotor na ƙarshen rotor, yanki na rami, farantin wayoyi, da sauransu).
Hotunan samfur
Babban Kwanan Wata na Fasaha
| Abu | Kadara | Naúrar | Matsakaicin Darajar | Darajar da Aka Saba | Hanyar Gwaji |
| 1 | Ƙarfin lankwasawa yana daidai da laminations | MPa | ≥380 | 510 | GB/T 1303.2 |
| 2 | Ƙarfin lankwasawa yana daidai da laminations | MPa | ≥190 | 380 | |
| 3 | Ƙarfin tauri | MPa | ≥300 | 442 | |
| 4 | Ƙarfin tasirin Charpy daidai da laminations (An ƙera) | kJ/m2 | ≥33 | 125 | |
| 5 | Ƙarfin wutar lantarki yana daidaita da laminations (a 90℃ ± 2℃ a cikin mai), kauri 1mm | kV/mm | ≥14.2 | 19.8 | |
| 6 | Ƙarfin wutar lantarki mai lalacewa daidai da laminations (a 90℃ ± 2℃ a cikin mai) | kV | ≥35 | ≥50 | |
| 7 | Juriyar Rufi (bayan nutsewa cikin ruwa awanni 24) | MΩ | ≥5.0 × 104 | 2.1 × 106 | |
| 8 | Izini na Dangantaka (50Hz) | - | ≤5.5 | 4.8 | |
| 9 | Sha ruwa, kauri 3mm | mg | ≤22 | 17 | |
| 10 | Yawan yawa | g/cm3 | 1.80~2.0 | 1.92 |
Tambayoyin da ake yawan yi akai-akai
Q1: Shin kai mai ciniki ne ko kamfani?
Mu ne manyan masana'antun hadakar kayan rufewa na lantarki, Mun kasance muna aiki a cikin hadakar thermoset mai tsauri tun daga 2003. Ikonmu shine 6000TON/shekara.
T2: Samfura
Samfura kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya za ku tabbatar da ingancin samar da kayayyaki?
Don kamanni, girma da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da tsari mai tsayayye, kuma za mu riƙa duba samfur akai-akai, za mu iya bayar da rahoton duba samfura kafin a kawo mana.
Q4: Lokacin isarwa
Ya dogara da adadin oda. Gabaɗaya, lokacin isarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da takardar sana'a ta ƙwararru don yin marufi a kan pallet ɗin plywood. Idan kuna da buƙatun marufi na musamman, za mu yi marufi kamar yadda kuke buƙata.
Q6: Biyan Kuɗi
TT, 30% T/T a gaba, ma'auni kafin jigilar kaya. Muna kuma karɓar L/C.