Takardar Laminated Fiberglass Mai Halogen Free FR4 (EPGC310)
Umarnin Samfuri
FR4 mara halogen yayi kama da FR4, amma tare da haɗin da ba halogen ba.An lulluɓe wannan samfurin da babban zafin jiki da matsin lamba mai yawa tare da zane mai fiber na lantarki wanda aka sanya shi da resin epoxy mara halogen. Yana da manyan kaddarorin injiniya, halayen dielectric da kaddarorin hana harshen wuta, kuma yana da kyakkyawan juriya ga zafi da juriya ga danshi;
Bin ƙa'idodi
Daidai da GB/T 1303.4-2009 resin thermoset na lantarki laminates na masana'antu - Kashi na 4: laminates masu tauri na epoxy resin, IEC 60893-3-2-2011 kayan rufewa - resin thermoset na lantarki laminates masu tauri na masana'antu - Kashi na 3-2 na takamaiman kayan EPGC310.
Aikace-aikace
Ana amfani da wannan samfurin musamman azaman madadinAna buƙatar babu halogensassan tsari na kayan aikin Mota da na lantarki, gami da duk nau'ikan makulli, kayan aikin lantarki, farantin ƙarfafa FPC, allon da'ira da aka buga da fim ɗin carbon, kushin haƙo kwamfuta, kayan aikin ƙira da narkewa (wutar gwajin PCB); kuma ya dace da yanayin danshi da man transformer.
Hotunan samfur
Babban Kwanan Wata na Fasaha (Danna nan don saukar da rahoton gwaji na ɓangare na uku)
| Kadara | Naúrar | Matsakaicin ƙima | Darajar da Aka Saba | Hanyar gwaji |
| Ƙarfin lankwasawa yana daidai da laminations (MD) | MPa | ≥340 | 480 | IEC60893-2：2003 |
| Ƙarfin tasirin Charpy daidai da laminations (Notched, MD) | kJ/m2 | ≥33 | 49 | |
| Ƙarfin tauri (MD) | MPa | ≥300 | 322 | |
| Ƙarfin wutar lantarki yana daidaita da laminations (a 90℃ ± 2℃ a cikin man transfoma mai lamba 25#, gwajin mataki-mataki na 20s, Φ25mm/Φ75mm silinda electrode) | kV/mm | ≥14.2 | 18.2 | |
| Ƙarfin wutar lantarki mai lalacewa daidai da laminations (a 90℃±2℃ a cikin man transfoma mai lamba 25#, gwajin mataki-mataki na 20s, Φ130mm/Φ130mm farantin lantarki) | kV | ≥35 | >50 | |
| Izini na Dangantaka (1MHz) | _ | ≤5.5 | 5.20 | |
| Juriyar Rufi (Electrodes masu taper fil, kuma tazarar lantarki shine 25.0mm) | Ω | ≥5.0 x1012 | 5.9x1013 | |
| Juriyar Rufi (Bayan awanni 24 a nutse cikin ruwa, ta amfani da na'urorin lantarki masu taper fil, kuma tazarar lantarki shine 25.0mm) | Ω | ≥5.0 x1010 | 1.3x1012 | |
| Ma'aunin bin diddigin kwatancen (CTI) | _ | _ | CTI600 | |
| Yawan yawa | g/cm3 | 1.9-2.1 | 2.0 | ISO1183-1: 2019 |
| Mai ƙonewa (Hanyar tsaye) | Aji | V-0 | V-0 | ANSI/UL-94-1985 |
| Ma'aunin zafin jiki | ℃ | _ | 130℃ |
Tambayoyin da ake yawan yi akai-akai
Q1: Shin kai mai ciniki ne ko kamfani?
Mu ne manyan masana'antun hadakar kayan rufewa na lantarki, Mun kasance muna aiki a cikin hadakar thermoset mai tsauri tun daga 2003. Ikonmu shine 6000TON/shekara.
T2: Samfura
Samfura kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya za ku tabbatar da ingancin samar da kayayyaki?
Don kamanni, girma da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da tsari mai tsayayye, kuma za mu riƙa duba samfur akai-akai, za mu iya bayar da rahoton duba samfura kafin a kawo mana.
Q4: Lokacin isarwa
Ya dogara da adadin oda. Gabaɗaya, lokacin isarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da takardar sana'a ta ƙwararru don yin marufi a kan pallet ɗin plywood. Idan kuna da buƙatun marufi na musamman, za mu yi marufi kamar yadda kuke buƙata.
Q6: Biyan Kuɗi
TT, 30% T/T a gaba, ma'auni kafin jigilar kaya. Muna kuma karɓar L/C.