Takardar Laminated ta PFCP202

Takardar PFCP202 Mai Laminated Takardar phenolic Hoton da aka Fito

Takaitaccen Bayani:

Bayanin Takamaiman Bayani
Suna	Takardar Laminate ta PFCP202
Kayan Tushe	Resin na Phenolic + Takardar Cellulosic
Launi	Ruwan kasa, Baƙi
Kauri	0.2mm – 100mm
Girma	Girman yau da kullun shine 1020x1220mm, 1020x2040mm, 1220x2470mm; Girman musamman, za mu iya samarwa da yankewa bisa ga buƙatun abokin ciniki.
Yawan yawa	1.37g/cm3
Takardar Bayanan Fasaha	Danna nan don saukewa

Aika mana imel Tuntube Mu

Cikakken Bayani game da Samfurin

Alamun Samfura

Umarnin Samfuri

Takardar laminate ta phenolic wani nau'in kayan haɗin gwiwa ne da aka yi ta hanyar sanya takarda a cikin ruwa da resin phenolic sannan a warkar da shi a ƙarƙashin zafi da matsin lamba.

Bin ƙa'idodi

IEC 60893-3-4: PFCP202.

Aikace-aikace

Babban amfani da wutar lantarki a mitoci masu ƙarfi. Babban ƙarfin lantarki a cikin mai. Kyakkyawan ƙarfin lantarki a cikin iska a cikin danshi na yau da kullun.

Babban Kwanan Wata na Fasaha

Kadara	Naúrar	Hanyar	Matsakaicin ƙima	Matsakaicin ƙima
Ƙarfin lanƙwasa yana daidai da lamination - a ƙarƙashin yanayin zafi na ɗaki na yau da kullun	MPa	ISO 178	≥ 120	139
Ƙarfin Dielectric yana daidaita da laminations (a cikin mai 90±2℃), kauri 1.0mm	kV/mm	IEC 60243	≥ 15.8	16.2
Ƙarfin wutar lantarki mai lalacewa daidai da laminations (a cikin mai 90±2℃)	kV	IEC 60243	≥60	65
Ma'aunin dielectric na 1MHz	-	IEC 60250	≤ 5.5	4.86
Ma'aunin asarar 1MHz	-	IEC 60250	≤0.05	0.024
Sha ruwa, kauri 1.6mm	mg	ISO 62	≤ 204	149
Yawan yawa	g/cm³	ISO 1183	1.30-1.45	1.36
Ƙarfin haɗin kai	N			3952

Tambayoyin da ake yawan yi akai-akai

Q1: Shin kai mai ciniki ne ko kamfani?

Mu ne manyan masana'antun hadakar kayan rufewa na lantarki, Mun kasance muna aiki a cikin hadakar thermoset mai tsauri tun daga 2003. Ikonmu shine 6000TON/shekara.

T2: Samfura

Samfura kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.

Q3: Ta yaya za ku tabbatar da ingancin samar da kayayyaki?

Don kamanni, girma da kauri: za mu yi cikakken dubawa kafin shiryawa.

Don ingancin aiki: Muna amfani da tsari mai tsayayye, kuma za mu riƙa duba samfur akai-akai, za mu iya bayar da rahoton duba samfura kafin a kawo mana.

Q4: Lokacin isarwa

Ya dogara da adadin oda. Gabaɗaya, lokacin isarwa zai kasance kwanaki 15-20.

Q5: Kunshin

Za mu yi amfani da takardar sana'a ta ƙwararru don yin marufi a kan pallet ɗin plywood. Idan kuna da buƙatun marufi na musamman, za mu yi marufi kamar yadda kuke buƙata.

Q6: Biyan Kuɗi

TT, 30% T/T a gaba, ma'auni kafin jigilar kaya. Muna kuma karɓar L/C.

Na baya: Takardar Laminated ta PFCP201 PHenolic Paper

Na gaba: Takardar Laminated ta PFCP203 PFCP203