Takardar Laminated ta G12 Epoxy
Umarnin Samfuri
Kayan G12 sune laminates masu ƙarfi waɗanda ba su da alkali, waɗanda aka haɗa su da babban resin epoxy na TG. Yana da ƙarfin injiniya mai ƙarfi a ƙarƙashin yanayin zafi na yau da kullun, har yanzu yana da ƙarfin injiniya mai ƙarfi, kyawawan kaddarorin lantarki a ƙarƙashin yanayin bushewa da danshi, ana iya amfani da shi a cikin yanayi mai danshi da man transformer. Yana cikin kayan hana zafi na aji H.
Bin ƙa'idodi
Daidai da GB/T 1303.4-2009 resin thermosetting lantarki laminates na masana'antu - Kashi na 4: laminates masu tauri na epoxy resin, IEC 60893-3-2-2011 kayan rufewa - resin thermosetting lantarki laminates masu tauri na masana'antu - Kashi na 3-2 na takamaiman kayan EPGC308.
Aikace-aikace
Ya dace da injinan jan hankali na aji 180 (H), manyan injina a matsayin ramukan rami da kayan lantarki masu inganci kamar yadda ake amfani da su wajen hana zafi,
Hotunan samfur
Babban Kwanan Wata na Fasaha (Danna nan don saukar da rahoton gwaji na ɓangare na uku)
| Abu | Kadara | Naúrar | Matsakaicin Darajar | Darajar da Aka Saba | Hanyar Gwaji |
| 1 | Ƙarfin lankwasawa yana daidai da laminations (MD, 23℃ ± 2℃) | MPa | ≥380 | 556 | GB/T 1303.2 |
| 2 | Ƙarfin lankwasawa yana daidai da laminations (MD, 180℃ ± 2℃) | MPa | ≥190 | 298 | |
| 3 | Ƙarfin lankwasawa yana daidai da laminations (MD, 23℃ ± 2℃) | MPa | _ | 24252 | |
| 4 | Ƙarfin tasirin Charpy daidai da laminations (Notched, MD) | kJ/m2 | ≥37 | 111 | |
| 5 | Ƙarfin tauri (MD) | MPa | ≥300 | 557 | |
| 6 | Ƙarfin matsi yana daidaita da laminations (23℃ ± 2℃) | MPa | ≥380 | 640 | |
| 7 | Ƙarfin matsi yana daidaita da laminations (180℃ ± 2℃) | MPa | ≥190 | 378 | |
| 8 | Ƙarfin wutar lantarki yana daidaita da laminations (a 90℃ ± 2℃ a cikin man transfoma mai lamba 25#, gwajin mataki-mataki na 20s, Φ25mm/Φ75mm silinda electrode) | kV/mm | ≥14.2 | 19.2 | |
| 9 | Ƙarfin wutar lantarki mai lalacewa daidai da laminations (a 90℃±2℃ a cikin man transfoma mai lamba 25#, gwajin mataki-mataki na 20s, Φ130mm/Φ130mm farantin lantarki) | kV | ≥45 | >100 | |
| 10 | Izini na Dangantaka (1MHz) | _ | ≤5.5 | 5.20 | |
| 11 | Ma'aunin watsawar Dielectric (1MHz) | _ | ≤0.04 | 0.0102 | |
| 12 | Juriyar rufi bayan nutsewa cikin ruwa (MD, na'urorin lantarki masu taper fil, rata 25.0mm) | Ω | ≥5.0 x1010 | 2.6x1014 | |
| 13 | Sha ruwa | mg | ≤22 | 18.00 |
|
| 14 | Yawan yawa | g/cm3 | 1.7-2.0 | 1.98 | |
| 15 | Ma'aunin zafin jiki | ℃ | _ | 180℃ | |
| 16 | TG | ℃ | _ | 200℃±5℃ |
Tambayoyin da ake yawan yi akai-akai
Q1: Shin kai mai ciniki ne ko kamfani?
Mu ne manyan masana'antun hadakar kayan rufewa na lantarki, Mun kasance muna aiki a cikin hadakar thermoset mai tsauri tun daga 2003. Ikonmu shine 6000TON/shekara.
T2: Samfura
Samfura kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya za ku tabbatar da ingancin samar da kayayyaki?
Don kamanni, girma da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da tsari mai tsayayye, kuma za mu riƙa duba samfur akai-akai, za mu iya bayar da rahoton duba samfura kafin a kawo mana.
Q4: Lokacin isarwa
Ya dogara da adadin oda. Gabaɗaya, lokacin isarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da takardar sana'a ta ƙwararru don yin marufi a kan pallet ɗin plywood. Idan kuna da buƙatun marufi na musamman, za mu yi marufi kamar yadda kuke buƙata.
Q6: Biyan Kuɗi
TT, 30% T/T a gaba, ma'auni kafin jigilar kaya. Muna kuma karɓar L/C.