Takardar Laminate ta Epoxy Fiberglass don Rufin Wutar Lantarki EPGC201 takardar launi kore
Bayanin Samfurin
Zane mai siffar gilashin phenolic epoxy mai laminated nau'in takardar EPGC201/3240:Wannan samfurin an yi shi ne da zane mai laushi wanda ba shi da alkali, an saka shi a cikin ruwan epoxy phenolic ta hanyar matsewa mai zafi. Tsarin thermostablity ɗinsa yana da daraja ta B. Yana da kyawawan halaye na injiniya da na dielectric.，
Yana aiki a fannin injiniya, lantarki, lantarki, lantarki da sauran fannoni. Haka kuma ana amfani da shi wajen sarrafa sassan rufi, kuma ana sarrafa shi zuwa dukkan nau'ikan sassan rufi da kayan aiki masu rufi, waɗanda za a iya amfani da su a yanayin danshi da man transformer.
Bin Ka'idoji da Ka'idoji
Daidai da GB/T 1303.4-2009 resin thermosetting lantarki laminates na masana'antu - Kashi na 4: laminates masu tauri na epoxy resin, IEC 60893-3-2-2011 kayan rufewa - resin thermosetting lantarki laminates masu tauri na masana'antu - Kashi na 3-2 na takamaiman kayan EPGC201.
Siffofi
1. Kyakkyawan kayan aikin injiniya;
2. Kyakkyawan halayen dielectrical;
3. Juriyar danshi, ya dace da ƙasa
muhalli mai danshi da man transfoma.
4. Kyakkyawan kayan aikin injin
5. Juriyar zafin jiki:Matsayi na B
Aikace-aikace
1) Ana amfani da shi wajen buƙatar aikin injiniya na babban injin, kayan aikin lantarki da sassan tsarin rufewa
2) ICT, ITE suna sarrafa sarrafa sassan rufi, kayan gwaji, maɓallan maɓallan roba na silicon
3) Farantin kayan aiki, plywood na mold, farantin niƙa na kan tebur, injunan marufi, tsefe, da sauransu
Babban Ma'aunin Aiki
| A'A. | KAYA | NAƘA | ƘARFIN MA'ANA | ||
| 1 | Yawan yawa | g/cm³ | 1.8-2.0 | ||
| 2 | Yawan shan ruwa | % | ≤0.5 | ||
| 3 | Ƙarfin lanƙwasawa a tsaye | MPa | ≥340 | ||
| 4 | Ƙarfin matsi a tsaye | MPa | ≥350 | ||
| 5 | Ƙarfin tasirin layi ɗaya (nau'in gibi mai kama da charpy) | KJ/m² | ≥33 | ||
| 6 | Ƙarfin tasiri mai layi ɗaya (hanyar katako mai kama da cantilever) | KJ/m² | ≥34 | ||
| 7 | Ƙarfin yanke layi ɗaya | Mpa | ≥30 | ||
| 8 | Ƙarfin tauri | MPa | ≥200 | ||
| 9 | Ƙarfin wutar lantarki a tsaye (a cikin mai na 90℃±2℃) | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 10 | Layi daya karfin wutar lantarki (a cikin mai na 90℃ ± 2℃) | KV | ≥35 | ||
| 11 | Ma'aunin watsawa na Dielectric (50Hz) | - | ≤0.04 | ||
| 12 | Juriyar Rufi | Na al'ada | Ω | ≥5.0 × 1012 | |
| Bayan an dafa na tsawon awanni 24 | ≥5.0 × 1010 | ||||
