Takardar Laminated ta PFCC201 zanen auduga na phenolic
Umarnin Samfuri
Ana samar da laminate na auduga mai siffar PF CP 201 ta hanyar haɗa layukan auduga da resin phenolic. Yana da ƙarfin injina mai kyau, don haka ya dace da aikace-aikacen da ake buƙatar kyawawan halaye na juriya ga lalacewa da kaya (haka kuma ya dace da muhallin da ƙura da sauran ƙazanta ke da shi). Kayan kuma yana da ingantattun halaye masu alaƙa da gogayya da kuma kariya daga sauti. Ana iya amfani da ruwa, mai ko mai a matsayin mai shafawa, idan ya cancanta. Samfurin yana jure wa ruwan gishiri da yanayin yanayi, kuma godiya ga yawan zafin jiki (120°C), ana iya amfani da shi don maye gurbin asbestos.
Bin ƙa'idodi
IEC 60893-3-4: PFCC201.
Aikace-aikace
Sassan rufi don janareta na lantarki, injin lantarki da kabad ɗin rarraba wutar lantarki da sauransu.
Man injin canza wutar lantarki, injin wanki mai jure wa abrasion, gidan ɗaukar kaya, rami, gear da kuma yankewa don injin lantarki da janareta na lantarki.
Hotunan samfur
Babban Kwanan Wata na Fasaha
| Kadara | Naúrar | Hanyar | Matsakaicin ƙima | Matsakaicin ƙima |
| Ƙarfin lankwasawa yana daidai da laminations - | MPa | ISO178 | ≥100 | 124 |
| Ƙarfin tasiri mai layi ɗaya da laminations (Girman da aka ƙera) | kJ/m2 | ISO179 | ≥8.8 | 9.1 |
| Ƙarfin dielectic yana daidaita da laminations (a cikin mai 90±2℃), kauri 1.0mm | kV/mm | IEC60243 | ≥0.82 | 4.0 |
| Sha ruwa mai kauri 2.0mm | mg | ISO62 | ≤229 | 181 |
| Yawan yawa | g/cm3 | ISO1183 | 1.30-1.40 | 1.35 |
| Ma'aunin zafin jiki | ℃ | IEC60216 | 120 | 120 |
| Juriyar Rufi An saka shi a cikin ruwa, D-24/23 | Ω | IEC60167 | ≥1.0 × 106 | 4.8 × 106 |
Tambayoyin da ake yawan yi akai-akai
Q1: Shin kai mai ciniki ne ko kamfani?
Mu ne manyan masana'antun hadakar kayan rufewa na lantarki, Mun kasance muna aiki a cikin hadakar thermoset mai tsauri tun daga 2003. Ikonmu shine 6000TON/shekara.
T2: Samfura
Samfura kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya za ku tabbatar da ingancin samar da kayayyaki?
Don kamanni, girma da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da tsari mai tsayayye, kuma za mu riƙa duba samfur akai-akai, za mu iya bayar da rahoton duba samfura kafin a kawo mana.
Q4: Lokacin isarwa
Ya dogara da adadin oda. Gabaɗaya, lokacin isarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da takardar sana'a ta ƙwararru don yin marufi a kan pallet ɗin plywood. Idan kuna da buƙatun marufi na musamman, za mu yi marufi kamar yadda kuke buƙata.
Q6: Biyan Kuɗi
TT, 30% T/T a gaba, ma'auni kafin jigilar kaya. Muna kuma karɓar L/C.
