Takardar Rufewa ta SMC
Umarnin Samfuri
Sinadarin gyaran takarda wani nau'in polyester ne mai ƙarfi wanda ke ɗauke da zare na gilashi. Zare, waɗanda yawanci tsayinsu ya kai inci 1 ko fiye, ana rataye su a cikin wanka na resin - yawanci epoxy, vinyl ester, ko polyester.
Aikace-aikace
Ana amfani da shi galibi a cikin kabad ɗin sarrafa wutar lantarki, akwatin rarrabawa, allon kunnawa da sauran sauran kayan aikin lantarki. Yana da kyakkyawan aikin lantarki, kyakkyawan aikin juriya ga harshen wuta, ƙarfin injiniya mai kyau, kyakkyawan saman santsi, kyakkyawan kwanciyar hankali mai girma.
Hotunan samfur
Babban Kwanan Wata na Fasaha
| Kadara | Naúrar | Hanyar | Matsakaicin ƙima | Matsakaicin ƙima |
| Yawan yawa | g/cm3 | ISO62 (Hanyar 1) | _ | 1.85 |
| Sha ruwa mai kauri 2.0mm | % | ISO62 (Hanyar 1) | _ | ≤0.30 |
| Ƙarfin lankwasawa yana daidai da laminations - a ƙarƙashin yanayin zafin ɗaki na al'ada | MPa | ISO178:2001 | _ | ≥130 |
| Ƙarfin lankwasawa yana daidai da laminations - ƙasa da 130℃ | MPa | ISO178:2001 | _ | ≥90 |
| Ƙarfin tauri | MPa | ISO527 | _ | ≥50 |
| Ƙarfin Matsi a ƙarƙashin 130℃ | MPa | ISO604:2002 | _ | ≥150 |
| Zafin juyawa a ƙarƙashin kaya Tf = 1.8MPa | ℃ | ISO75-2:2003 | _ | ≥220 |
| Ma'aunin zafin jiki (TI) Zafin juriya ga zafi na dogon lokaci | ℃ | IEC60216 | _ | 155 |
| Juriyar Rufi | Ω | IEC60167:1964 | _ | ≥1.0x1012 |
| Juriyar rufi bayan nutsewa cikin ruwa awanni 24 | Ω | IEC60167:1964 | _ | ≥1.0x1010 |
| Ƙarfin Dielectric mataki-mataki a cikin mai a 23℃, Kauri 1-3mm | kV/mm | IEC60243 | _ | ≥12.0 |
| Izini na Dangantaka (50Hz) | _ | IEC60250 | _ | ≤4.5 |
| Ma'aunin dielectric disassip factor (50Hz) | _ | IEC60250 | _ | ≤0.015 |
| Juriyar Baka | S | IEC61621 | _ | ≥180 |
| Juriyar Bin-sawu (CTI) | V | IEC60112 | _ | ≥600 |
| Rashin ƙonewa | Aji | UL94 | _ | V-0 |
Tambayoyin da ake yawan yi akai-akai
Q1: Shin kai mai ciniki ne ko kamfani?
Mu ne manyan masana'antun hadakar kayan rufewa na lantarki, Mun kasance muna aiki a cikin hadakar thermoset mai tsauri tun daga 2003. Ikonmu shine 6000TON/shekara.
T2: Samfura
Samfura kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya za ku tabbatar da ingancin samar da kayayyaki?
Don kamanni, girma da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da tsari mai tsayayye, kuma za mu riƙa duba samfur akai-akai, za mu iya bayar da rahoton duba samfura kafin a kawo mana.
Q4: Lokacin isarwa
Ya dogara da adadin oda. Gabaɗaya, lokacin isarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da takardar sana'a ta ƙwararru don yin marufi a kan pallet ɗin plywood. Idan kuna da buƙatun marufi na musamman, za mu yi marufi kamar yadda kuke buƙata.
Q6: Biyan Kuɗi
TT, 30% T/T a gaba, ma'auni kafin jigilar kaya. Muna kuma karɓar L/C.
