Takardar Laminate ta Gilashin G5 Melamine (MFGC201)
Umarnin Samfuri
Kayan NEMA Grade G-5 sune laminates masu ƙarfi waɗanda ba su da alkali na lantarki, waɗanda aka haɗa su da resin melamine. Yana da kyakkyawan juriya ga baka da wasu kaddarorin dielectric da kaddarorin hana harshen wuta.
Bin ƙa'idodi
NEMA LI-1 Grade G5 ● IEC60893-3-3:MFGC201(takarda) ● GB/T 1303.2.2009:3233
Aikace-aikace
Ana iya amfani da shi azaman kayan juriya na baka a cikin maɓallan, sassan tsarin kayan lantarki da kayan keɓewa don kayan lantarki.
Hotunan samfur
Babban Kwanan Wata na Fasaha (Danna nan don saukar da rahoton gwaji na ɓangare na uku)
| Kadara | Naúrar | Matsakaicin ƙima | Matsakaicin ƙima |
| Ƙarfin lankwasawa yana daidai da laminations | MPa | ≥240 | 290 |
| Ƙarfin tasirin Charpy daidai da laminations (An ƙera) | kJ/m2 | ≥30 | 33 |
| Ƙarfin tauri | MPa | ≥150 | 260 |
| Ƙarfin wutar lantarki yana daidaita da laminations (a 90℃ ± 2℃), kauri 1mm | kV/mm | ≥7.0 | 9.2 |
| Juriyar Rufi (bayan nutsewa cikin ruwa awanni 24) | Ω | ≥1.0 x107 | 4.5 x109 |
| Juriyar Baka | s | ≥180 | 183.0 |
| Ma'aunin bin diddigin kwatancen (CTI) | _ | ≥500 | CTI600 |
| Izini na Dangantaka (50Hz) | _ | ≤7.5 | 6.97 |
| Watsar Dielectric (50Hz) | _ | ≤0.02 | 0.02 |
| Sha ruwa, kauri 2mm | mg | ≤155 | 132.00 |
| Rashin ƙonewa | Aji | V-0 | V-0 |
Tambayoyin da ake yawan yi akai-akai
Q1: Shin kai mai ciniki ne ko kamfani?
Mu ne manyan masana'antun hadakar kayan rufewa na lantarki, Mun kasance muna aiki a cikin hadakar thermoset mai tsauri tun daga 2003. Ikonmu shine 6000TON/shekara.
T2: Samfura
Samfura kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya za ku tabbatar da ingancin samar da kayayyaki?
Don kamanni, girma da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da tsari mai tsayayye, kuma za mu riƙa duba samfur akai-akai, za mu iya bayar da rahoton duba samfura kafin a kawo mana.
Q4: Lokacin isarwa
Ya dogara da adadin oda. Gabaɗaya, lokacin isarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da takardar sana'a ta ƙwararru don yin marufi a kan pallet ɗin plywood. Idan kuna da buƙatun marufi na musamman, za mu yi marufi kamar yadda kuke buƙata.
Q6: Biyan Kuɗi
TT, 30% T/T a gaba, ma'auni kafin jigilar kaya. Muna kuma karɓar L/C.