Takardar Laminated ta FR5 Hard Epoxy Glassfiber
Bayanin Samfurin
An yi wa wannan samfurin ado da babban zafin jiki da matsin lamba mai yawa, wanda aka yi da injin lantarki wanda ba shi da alkali, wanda aka sanya masa resin epoxy na musamman, kuma ya ƙunshi kayan kariya daga zafi na aji F. Yana da manyan kaddarorin injiniya a ƙarƙashin matsakaicin zafin jiki, kuma yana aiki da ƙarfi a ƙarƙashin babban zafin jiki. Ya dace da amfani da shi a fannin injiniya, lantarki da lantarki a matsayin manyan abubuwan kariya. Yana da ƙarfin injiniya mai ƙarfi, ƙarfin yanayin zafi, juriyar wuta, juriyar zafi da juriyar zafi.
Bin Ka'idoji da Ka'idoji
Daidai da GB/T 1303.4-2009 resin thermosetting lantarki laminates na masana'antu - Kashi na 4: laminates masu tauri na epoxy resin, IEC 60893-3-2-2011 kayan rufewa - resin thermosetting lantarki laminates masu tauri na masana'antu - Kashi na 3-2 na takamaiman kayan EPGC204.
Siffofi
1. Manyan halayen injiniya a ƙarƙashin zafin jiki na midium;
2. Kyakkyawan kwanciyar hankali na lantarki a ƙarƙashin zafin jiki mai yawa;
3. Babban ƙarfin injina
4. Ƙarfin injina mai girma a ƙarƙashin zafin jiki mai yawa;
5. Juriyar zafi mai yawa;
6. Ba shi da juriya ga danshi;
7. Kyakkyawan injina;
8. Juriyar zafin jiki:Grade F;
9. Kayan aikin hana harshen wuta: UL94 V-0
Aikace-aikace
Ana amfani da shi don kayan aikin injiniya, na lantarki, da na lantarki a matsayin abubuwan hana ruwa shiga, kuma ana amfani da shi a cikin man transformer da muhallin danshi.
Idan aka kwatanta da FR5 da FR4, TG ya fi girma, yanayin zafi shine matakin F (digiri 155), FR5 ɗinmu ya ci gwajin EN45545-2:2013+A1:2015: Aikace-aikacen layin dogo - Kare gobara na motocin layin dogo - Kashi na 2: Bukatar halayen wuta na kayan aiki da abubuwan haɗin gwiwa. Kuma a amince da su ta hanyarCRRC,mun fara samar da FR5 zuwaCRRCdaga 2020. Idan kuna da wasu tambayoyi da fatan za a tuntuɓe mu.
Babban Ma'aunin Aiki
| A'A. | KAYA | NAƘA | ƘARFIN MA'ANA | ||
| 1 | Yawan yawa | g/cm³ | 1.8-2.0 | ||
| 2 | Yawan shan ruwa | % | ≤0.5 | ||
| 3 | Ƙarfin lanƙwasawa a tsaye | Na al'ada | MPa | ≥380 | |
| 155±2℃ | ≥190 | ||||
| 4 | Ƙarfin matsi | Tsaye | MPa | ≥350 | |
| Layi daya | ≥260 | ||||
| 5 | Ƙarfin tasiri (nau'in charpy) | Tsawon hanya babu gibi | KJ/m² | ≥147 | |
| 6 | Ƙarfin haɗin kai | N | ≥6800 | ||
| 7 | Ƙarfin tauri | Hanya Mai Nisa | MPa | ≥320 | |
| Kwance | ≥240 | ||||
| 8 | Ƙarfin wutar lantarki a tsaye (a cikin mai na 90℃±2℃) | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 9 | Layin lantarki mai lalacewa daidai gwargwado (minti 1 a cikin mai na 90℃ ± 2℃) | KV | ≥40 | ||
| 10 | Ma'aunin watsawa na Dielectric (50Hz) | - | ≤0.04 | ||
| 11 | Juriyar Rufi | Na al'ada | Ω | ≥1.0 × 1012 | |
| Bayan an dafa na tsawon awanni 24 | ≥1.0 × 1010 | ||||
| 12 | Konewa (UL-94) | Mataki | V-0 | ||
