Takardar Laminated Glassfiber mai hana wuta ta G11 Halogen
Bayanin Samfurin
An yi wannan samfurin ne da zane mai zare na gilashi mara alkali na lantarki a matsayin kayan tallafi, tare da babban resin epoxy na TG a matsayin abin ɗaurewa ta hanyar matsewa mai zafi wanda aka laminated a ƙarƙashin zafin digiri 155. Yana da ƙarfin injiniya mai ƙarfi a ƙarƙashin yanayin zafi na yau da kullun, har yanzu yana da ƙarfin injiniya mai ƙarfi, kyawawan halayen lantarki a ƙarƙashin yanayin busasshe da danshi, ana iya amfani da shi a cikin yanayi mai danshi da man transformer. Yana cikin kayan hana zafi na aji F. Bayanan fasaha suna kama da FR5, amma ba mai hana wuta ba.
Bin Ka'idoji da Ka'idoji
Daidai da GB/T 1303.4-2009 resin thermosetting lantarki laminates na masana'antu - Kashi na 4: laminates masu tauri na epoxy resin, IEC 60893-3-2-2011 kayan rufewa - resin thermosetting lantarki laminates masu tauri na masana'antu - Kashi na 3-2 na takamaiman kayan EPGC203.
Siffofi
1. Babban kwanciyar hankali na lantarki a ƙarƙashin matsanancin zafi;
2. Kyakkyawan kayan aikin injiniya;
3. Ƙarfin injina mai girma a ƙarƙashin zafin jiki mai yawa;
4. Juriyar Danshi Mai Girma;
5. Juriyar zafi mai yawa;
6. Juriyar zafin jiki: Grade F
Aikace-aikace
Ana amfani da shi ga kowane irin injin, lantarki, lantarki da sauran fannoni, ana amfani da shi sosai a cikin injin, kayan lantarki kamar sassan tsarin rufi, makullin wutar lantarki mai ƙarfi, makullin wutar lantarki mai ƙarfi (kamar kayan rufin stator na mota a ƙarshen biyu, yanki na farantin rotor na ƙarshen rotor, yanki na rami, farantin wayoyi, da sauransu).
Babban Ma'aunin Aiki
| A'A. | KAYA | NAƘA | ƘARFIN MA'ANA | ||
| 1 | Yawan yawa | g/cm³ | 1.8-2.0 | ||
| 2 | Yawan shan ruwa | % | ≤0.5 | ||
| 3 | Ƙarfin lanƙwasawa a tsaye | Na al'ada | MPa | ≥380 | |
| 155±2℃ | ≥190 | ||||
| 4 | Ƙarfin matsi | Tsaye | MPa | ≥300 | |
| Layi daya | ≥200 | ||||
| 5 | Ƙarfin tasiri (nau'in charpy) | Tsawon hanya babu gibi | KJ/m² | ≥147 | |
| 6 | Ƙarfin haɗin kai | N | ≥6800 | ||
| 7 | Ƙarfin tauri | Hanya Mai Nisa | MPa | ≥300 | |
| Kwance | ≥240 | ||||
| 8 | Ƙarfin wutar lantarki a tsaye (a cikin mai na 90℃±2℃) | 1mm | KV/mm | ≥14.2 | |
| 2mm | ≥11.8 | ||||
| 3mm | ≥10.2 | ||||
| 9 | Layin lantarki mai lalacewa daidai gwargwado (minti 1 a cikin mai na 90℃ ± 2℃) | KV | ≥40 | ||
| 10 | Ma'aunin watsawa na Dielectric (50Hz) | - | ≤0.04 | ||
| 11 | Juriyar Rufi | Na al'ada | Ω | ≥1.0 × 1012 | |
| Bayan an dafa na tsawon awanni 24 | ≥1.0 × 1010 | ||||
