PFCP201 Paper Laminated Sheet
Umarnin Samfura
Takarda laminate takarda nau'in nau'in kayan abu ne wanda aka yi ta hanyar zubar da takarda tare da resin phenolic sannan a warke ta cikin zafi da matsa lamba.
Yarda da ka'idoji
IEC 60893-3-4: PFCP201.
Aikace-aikace
Aikace-aikacen injina.Kayan injina mafi kyau fiye da sauran nau'ikan PFCP.Rashin ƙarancin wutar lantarki a cikin yanayin zafi na al'ada. Hakanan ana samun su cikin nau'ikan nau'ikan naushi mai zafi.
Babban Ranar Fasaha
Dukiya | Naúrar | Hanya | Daidaitaccen darajar | Mahimman ƙima |
Ƙarfin sassauƙa daidai gwargwado ga laminations - ƙarƙashin yanayin ɗaki na al'ada | MPa |
ISO 178 | ≥ 135 | 156 |
Ruwan sha, 2.0mm a cikin kauri | mg |
ISO 62 | ≤ 500 | 127 |
Dielectric ƙarfi perpendicular zuwa laminations (a cikin mai 20 ± 5 ℃), 1.0mm a kauri | kV/mm |
Saukewa: IEC60243 | 1.30-1.40 | 1.37 |
FAQ
Q1: Shin ku kamfani ne ko masana'anta?
Mu ne manyan manufacturer na lantarki insulating composite, Mun kasance tsunduma a manufacturer thermoset m composite tun 2003.Our iya aiki ne 6000TONS / shekara.
Q2: Misali
Samfuran kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya kuke tabbatar da ingancin yawan samar da taro?
Don bayyanar, girman da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da ƙayyadaddun tsari, kuma za mu kasance gwajin samfur na yau da kullun, zamu iya samar da rahoton binciken samfur kafin jigilar kaya.
Q4: Lokacin bayarwa
Ya dogara da adadin tsari. Gabaɗaya magana, lokacin bayarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da ƙwararrun takarda don yin fakiti akan pallet.idan kuna da buƙatun fakiti na musamman, za mu shirya kamar yadda kuke buƙata.
Q6: Biya
TT, 30% T / T a gaba, ma'auni kafin kaya. Mun kuma yarda da L / C.