PFCP203 Paper Laminated Sheet
Umarnin Samfura
Takarda laminate takarda nau'in nau'in kayan abu ne wanda aka yi ta hanyar zubar da takarda tare da resin phenolic sannan a warke ta cikin zafi da matsa lamba.
Yarda da ka'idoji
IEC 60893-3-4: PFCP203.
Aikace-aikace
Makanikai da aikace-aikacen lantarki.Kyawawan kaddarorin lantarki a cikin yanayin zafi na al'ada. Hakanan ana samun su cikin nau'ikan naushi mai zafi.
Babban Ranar Fasaha
| Dukiya | Naúrar | Hanya | Daidaitaccen darajar | Mahimman ƙima |
| Ƙarfin sassauƙa daidai gwargwado ga laminations - ƙarƙashin yanayin ɗaki na al'ada | MPa |
ISO 178 | ≥120 | 135 |
| Ƙarfin dielectric perpendicular zuwa laminations (a cikin mai 90 ± 2 ℃),0.5mm a kauri | kV/mm |
Saukewa: IEC60243 | ≥7.6 | 8.5 |
| Rashin wutar lantarki paralle tolaminations (a cikin mai 90 ± 2 ℃) | kV |
Saukewa: IEC60243 | ≥15 | 26 |
| Juriya na insulation da ke cikin ruwa, D-24/23 | Ω | Saukewa: IEC60167 | ≥5.0×107 | 7.5×107 |
| Ruwan sha,0.5mm a kauri | mg |
ISO 62 | ≤162 | 108 |
| Yawan yawa | g/cm3 | ISO 1183 | 1.30-1.45 | 1.37 |
FAQ
Q1: Shin ku kamfani ne ko masana'anta?
Mu ne manyan manufacturer na lantarki insulating composite, Mun kasance tsunduma a manufacturer thermoset m composite tun 2003.Our iya aiki ne 6000TONS / shekara.
Q2: Misali
Samfuran kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya kuke tabbatar da ingancin yawan samar da taro?
Don bayyanar, girman da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da ƙayyadaddun tsari, kuma za mu kasance gwajin samfur na yau da kullun, zamu iya samar da rahoton binciken samfur kafin jigilar kaya.
Q4: Lokacin bayarwa
Ya dogara da adadin tsari. Gabaɗaya magana, lokacin bayarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da ƙwararrun takarda don yin fakiti akan pallet.idan kuna da buƙatun fakiti na musamman, za mu shirya kamar yadda kuke buƙata.
Q6: Biya
TT, 30% T / T a gaba, ma'auni kafin kaya. Mun kuma yarda da L / C.
