Takardar Laminated Fiberglass ta FR5 mara halogen (EPGC311)
Umarnin Samfuri
FR5 mara halogen kamar FR5, amma tare da mahaɗin mara halogen. An lulluɓe wannan samfurin da babban zafin jiki da matsin lamba mai yawa tare da zane mai amfani da gilashin fiber na lantarki wanda aka sanya masa ruwan ƙarfe na musamman, wanda aka sanya masa resin epoxy na musamman, yana cikin kayan kariya na juriya ga zafi na matakin F. Yana da manyan kaddarorin injiniya a ƙarƙashin matsakaicin zafin jiki, kuma yana aiki da ƙarfi a ƙarƙashin zafin jiki mai yawa. Ya dace da amfani da shi a cikin injina, lantarki da lantarki a matsayin manyan abubuwan kariya. Yana da ƙarfin injiniya mai yawa, ƙarfin yanayin zafi, juriyar wuta, juriyar zafi da juriyar zafi. Ya dace da kasuwannin buƙatun halogen.
Bin ƙa'idodi
Daidai da GB/T 1303.4-2009 resin thermosetting lantarki laminates na masana'antu - Kashi na 4: laminates masu tauri na epoxy resin, IEC 60893-3-2-2011 kayan rufewa - resin thermosetting lantarki laminates masu tauri na masana'antu - Kashi na 3-2 na takamaiman kayan EPGC204.
Aikace-aikace
Ana amfani da shi don kayan aikin injiniya, na lantarki, da na lantarki a matsayin abubuwan hana ruwa shiga, kuma ana amfani da shi a cikin man transformer da muhallin danshi.
Hotunan samfur
Babban Kwanan Wata na Fasaha (Danna nan don saukar da rahoton gwaji na ɓangare na uku)
| Abu | Kadara | Naúrar | Matsakaicin Darajar | Darajar da Aka Saba | Hanyar Gwaji | |
| 1 | Ƙarfin lankwasawa yana daidai da laminations | MPa | ≥340 | 525 | GB/T 1303.2 | |
| 2 | Ƙarfin lankwasawa yana daidai da laminations (155℃ ± 2℃) | MPa | ≥170 | 314 |
| |
| 3 | Ƙarfin tauri | MPa | ≥300 | 381 |
| |
| 4 | Ƙarfin tasirin Charpy daidai da laminations (An ƙera) | kJ/m2 | ≥33 | 78 |
| |
| 5 | Ƙarfin wutar lantarki yana daidaita da laminations (a 90℃ ± 2℃ a cikin mai), kauri 1mm | kV/mm | ≥14.2 | 17.2 |
| |
| 6 | Ƙarfin wutar lantarki mai lalacewa daidai da laminations (a 90℃ ± 2℃ a cikin mai) | kV | ≥30 | ≥50 |
| |
| 7 | Juriyar Rufi (bayan nutsewa cikin ruwa awanni 24) | MΩ | ≥5.0 × 104 | 4.2×106 |
| |
| 8 | Izini na Dangantaka (50Hz) | - | ≤5.5 | 4.9 |
| |
| 9 | Sha ruwa, kauri 3mm | mg | ≤22 | 17 |
| |
| 10 | Yawan yawa | g/cm3 | 1.90~2.1 | 1.99 |
| |
| 11 | Mai ƙonewa (Hanyar tsaye) |
| 级 | V-0 | V-0 |
|
| 12 | Ma'aunin zafin jiki | ℃ | _ | 155℃ |
| |
| 13 | TG | ℃ | _ | 170℃±5℃ | ||
Tambayoyin da ake yawan yi akai-akai
Q1: Shin kai mai ciniki ne ko kamfani?
Mu ne manyan masana'antun hadakar kayan rufewa na lantarki, Mun kasance muna aiki a cikin hadakar thermoset mai tsauri tun daga 2003. Ikonmu shine 6000TON/shekara.
T2: Samfura
Samfura kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya za ku tabbatar da ingancin samar da kayayyaki?
Don kamanni, girma da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da tsari mai tsayayye, kuma za mu riƙa duba samfur akai-akai, za mu iya bayar da rahoton duba samfura kafin a kawo mana.
Q4: Lokacin isarwa
Ya dogara da adadin oda. Gabaɗaya, lokacin isarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da takardar sana'a ta ƙwararru don yin marufi a kan pallet ɗin plywood. Idan kuna da buƙatun marufi na musamman, za mu yi marufi kamar yadda kuke buƙata.
Q6: Biyan Kuɗi
TT, 30% T/T a gaba, ma'auni kafin jigilar kaya. Muna kuma karɓar L/C.
