PFCP207 Paper Laminated Sheet(Cold Punch)
Umarnin Samfura
Takarda laminate takarda nau'in nau'in kayan abu ne wanda aka yi ta hanyar zubar da takarda tare da resin phenolic sannan a warke ta cikin zafi da matsa lamba.
Yarda da ka'idoji
IEC 60893-3-4: PFCP207.
Aikace-aikace
Aikace-aikacen injina.Kayan injina sun fi sauran nau'ikan PFCP kyau.PFCP207 yayi kama da PFCP201, amma tare da ingantattun halayen jaka a ƙananan zafin jiki.
Hotunan samfur
Babban Ranar Fasaha
| Dukiya | Naúrar | Hanya | Daidaitaccen darajar | Mahimman ƙima |
| Ƙarfin sassauƙa daidai gwargwado ga laminations - ƙarƙashin yanayin ɗaki na al'ada | MPa |
ISO 178 | ≥ 80 | 145 |
| Ruwan sha, 2.0mm a cikin kauri | mg |
ISO 62 | ≤ 500 | 106 |
| Dielectric ƙarfi perpendicular zuwa laminations (a cikin mai 20 ± 5 ℃), 1.0mm a kauri | kV/mm |
Saukewa: IEC60243 | - | 13 |
| Rushewar wutar lantarki daidai da laminations (a cikin mai 20 ± 5 ℃) | kV |
Saukewa: IEC60243 | - | 38 |
| Yawan yawa | g/cm3 | ISO 1183 | 1.30-1.40 | 1.36 |
| Ƙarfin sassauƙa daidai gwargwado ga laminations - ƙarƙashin yanayin ɗaki na al'ada | MPa |
ISO 178 | ≥ 80 | 145 |
FAQ
Q1: Shin ku kamfani ne ko masana'anta?
Mu ne manyan manufacturer na lantarki insulating composite, Mun kasance tsunduma a manufacturer thermoset m composite tun 2003.Our iya aiki ne 6000TONS / shekara.
Q2: Misali
Samfuran kyauta ne, kawai kuna buƙatar biyan kuɗin jigilar kaya.
Q3: Ta yaya kuke tabbatar da ingancin yawan samar da taro?
Don bayyanar, girman da kauri: za mu yi cikakken dubawa kafin shiryawa.
Don ingancin aiki: Muna amfani da ƙayyadaddun tsari, kuma za mu kasance gwajin samfur na yau da kullun, zamu iya samar da rahoton binciken samfur kafin jigilar kaya.
Q4: Lokacin bayarwa
Ya dogara da adadin tsari. Gabaɗaya magana, lokacin bayarwa zai kasance kwanaki 15-20.
Q5: Kunshin
Za mu yi amfani da ƙwararrun takarda don yin fakiti akan pallet.idan kuna da buƙatun fakiti na musamman, za mu shirya kamar yadda kuke buƙata.
Q6: Biya
TT, 30% T / T a gaba, ma'auni kafin kaya. Mun kuma yarda da L / C.
